The average lifespan of a car battery is within three to five years, but that does not mean it will last for such a period. Numerous other factors affect the proper functioning of a car and the lifespan of the car battery. Heat, vibration, outside temperature, and time affect the battery’s longevity. This means you can never predict when your car might break down in the middle of the road. What can you do if it happens in the dead of the night or in a deserted area where there are no other vehicles? Can you jump-start your car without depending on another vehicle? The answer is yes. It would help if you had a portable jump starter that you could carry in your car for times like this. 

This is a powerful device that can help start your car in seconds. It is designed to revive the discharged battery without having to depend on any other power source or vehicle. 

• How to use the jump starter?

When the car battery is completely discharged or dead, there are two ways to get it running – either opt for push-starting or a portable jump starter. The former will work only if you have a vehicle with manual transmission and are on a downward incline or you have other people to maneuver the car. But for the latter to work, you don’t have to depend on anyone. Just plug it into your car engine, and you are good to go. 

The portable jump starters are like a small backup battery in your vehicle. They have cables attached so that you can connect them to your car battery and charge them. These boxes offer way more advantages than merely jump-starting the car. They prevent the car from voltage spiking and stop the vehicle’s electrical system from frying your car. 

• Steps to take when jump-starting the car:

If you have never used a jump starter before, you must collect all the necessary information to use this device. 

1. Before going on long trips, you should read through the manual to clearly understand how to operate the device. 
2. We recommend you practice jump-starting before hitting the road, especially if the car’s battery is in trouble.
3. you should connect the integrated cables to the engine when using the device. 
4. Connect the red clamp to the positive side of the battery and the black clamp to the negative side.
5. Once you have connected everything, you should turn on the device according to the manual’s instructions. 
6. If the car does not start, you should wait a few minutes before starting it again.
7. Once the car starts, turn off the jump starter and remove the clamps in reverse order. 

• Not sure if you are buying the proper devices? Here’s what you should look for:

When you are browsing through the diverse collection of jump starters at Astroai.com you should look for these features:

1. LCD jump guide with assisted battery status.
2. Can charge three other devices simultaneously.
3. Should have multi-mode LED flashlight.

Final words:

Using the device according to the instructions in the manual is always a wise decision. You can also watch videos on YouTube to get a better idea of how to use the device. These videos are really helpful.